RAILBLAZA G-Hold 50mm | YakGear

RAILBLAZA G-Hold 50mm

(8 customer reviews)

$14.99

In stock

Description

The RAILBLAZA G-Hold 50 is recommended to secure paddles, Boga grips and anything of moderate size up to 2 inches around.  This G-Hold is 50mm (2 inches).  The flexible quick-release strap has two securing points for the security of minimum and maximum diameters, providing strong retention. The G-Hold strap has rungs with which to set the tension of each G-Hold firmly. While G-Holds are supplied in singles, it is recommended to use two for long-spanning objects, similar to molded rubber or folding paddle clips. During installation, make sure the G-Holds are parallel when mounted in pairs. When fitting to a StarPort on a vertical surface, make sure the longer arm is positioned at the bottom because this provides extra support before tensioning the strap in place.  All G-Holds install in any RAILBLAZA base.  No hardware is needed for accessory installation because the RAILBLAZA port based system is not included.  **All RAILBLAZA accessories fit the different RAILBLAZA port based systems.  Base not included. WARNING

  • Sizing: 50mm (2 inches)
  • Features tension setting rungs
  • Sold in singles, while two are recommended for linear use on longer accessories
  • Base not included

Additional information

Weight 1 lbs
Dimensions 5 × 3.75 × 1.25 in

8 reviews for RAILBLAZA G-Hold 50mm

  1. Alan Ryland

    Mounted the G Hold with the 19-25 rail mount Star Port on my Jackson Big Rig on the side of the stand up bar. Perfect placement for my push pole for quick access when sight fishing.

  2. Ben H

    I have a Diablo kayak that I stand and fly fish in. I always had to bend over for my paddle. I have the stand up bar and mounted the Railblaza Railmount on it with a GHold and it is great. I dont have to lean over for my paddle. I also mounted another Railmount with a Railblaza Rod Holder too. It is so easy to fish and move around without constantly bending over

  3. Ed P

    The G-Hold not only holds my paddle perfectly, but works great on my push pole too. The latch is easy to secure or remove with one hand, which is great when sight fishing. The shape cradles the pole/paddle so it doesn’t fall as soon as you take the latch off, which is awesome. Highly recommend.

  4. Ed P

    The G-Hold not only holds my paddle perfectly, but works great on my push pole too. The latch is easy to secure or remove with one hand, which is great when sight fishing. The shape cradles the pole/paddle so it doesn’t fall as soon as you take the latch off, which is awesome. Highly recommend.

  5. Joe

    I use these on my Kayak Kaddy to hold my spare paddle. They hold the paddles very secure so that I have no worry about them falling off.
    Worth having if you need to secure a paddle

  6. Joshua J Jaworski

    Mounted on one starport base and a HD base to hold my adjustable mud stick anchor. Couldn’t have found a better option to complete the job.

  7. Tom

    Works great to hold paddle or my shotgun for duck and goose hunting used it the other day to hold shotgun going out, and paddle as I was hunting. Yak customer service is great.

  8. Bill

    I’m using the RAILBLAZA G-Hold with the Fixed Extender as a support point for my Camera Boom Mount on my surf ski. When waves wash across the foredeck (and they do) the G-Hold keeps the Boom Mount secure and in position. Great accessory!

Only logged in customers who have purchased this product may leave a review.

You may also like…

  • RAILBLAZA SidePort Base

    $12.99
    Select options
  • RAILBLAZA StarPort HD Base

    RAILBLAZA StarPort HD Base

    $15.99
    Add to cart
  • RAILBLAZA Mobi Adjustable Device Holder

    RAILBLAZA Mobi Adjustable Device Holder

    $36.99
    Add to cart
  • railblaza_starport_base

    RAILBLAZA StarPort Base

    $15.99
    Select options
« SHOP | MENU »