YakGear Rod Holder Extender Kit

5.00 out of 5 based on 6 customer ratings
(7 customer reviews)

$11.99

Description

Stop abusing your rod and reel with the YakGear Rod Holder Extender Kit. This 18-inch extender helps reduce water, especially detrimental salt water, from spraying on your reels by elevating the rod 9 inches off of the deck of the boat. The extender offers multiple features for a universal fit into any flush mount or rod holder by sliding into the existing flush mount rod holder. To immediately eliminate any possible wiggle room, the extender comes with two rubber O-Rings and adhesive backed velcro straps to ensure a snug fit. As always, this complete kit comes with all stainless steel installation hardware, installation instructions, and rigging tips from Yak Gear.

  • 18″ universal rod holder extender used to minimize the abuse of fishing equipment  by elevating it 9″
  • Pad eye included for accessible leashing
  • Two rubber o-rings and adhesive backed velcro included ensuring proper fitment
  • Installation instruction and hardware included

Additional information

Weight 1 lbs

7 reviews for YakGear Rod Holder Extender Kit

  1. 5 out of 5

    I love these things. I use them on all of kayaks with flush mounts. Fishing in the saltwater beat reels up, only makes since to keep them as elevated from the water as possible!

  2. 5 out of 5

    I love these things. I use them on all of kayaks with flush mounts. Fishing in the saltwater beat reels up, only makes since to keep them as elevated from the water as possible!

  3. 5 out of 5

    I purchased these rod holders because I was contemplating making some and decided to give them a try. My first impression was they seemed a bit light weight and thin walled to be very durable but I have had no problems at all. Drop in fit for my factory flush mount rod holders on my Feelfree Moken 14 but you can also custom fit them for larger holders using Velcro strip wrapped around the base to make them press fit. I will buy more for my other kayaks.

  4. 5 out of 5

    I purchased these rod holders because I was contemplating making some and decided to give them a try. My first impression was they seemed a bit light weight and thin walled to be very durable but I have had no problems at all. Drop in fit for my factory flush mount rod holders on my Feelfree Moken 14 but you can also custom fit them for larger holders using Velcro strip wrapped around the base to make them press fit. I will buy more for my other kayaks.

  5. 5 out of 5

    Great rod holder extender, best part…….it can be used on almost any kayak. I switch this between my hobie and field and stream regularly with no problems. Use it with my conventional and spinning reels.

  6. 5 out of 5

    Great rod holder extender, best part…….it can be used on almost any kayak. I switch this between my hobie and field and stream regularly with no problems. Use it with my conventional and spinning reels.

  7. Well made rod holder nice and sturdy. Great price point compared to other similar items.

Add a review

Your email address will not be published.

You may also like…

  • YakGear Universal Drain Plug Kit

    YakGear Universal Drain Plug Kit

    5.00 out of 5
    $8.99
    Add to cart
  • YakGear Flush Mount Rod Holder Gasket

    YakGear Flush Mount Rod Holder Gasket

    $3.99
    Add to cart
  • YakGear Flush Mount Rod Holder Kit

    YakGear Flush Mount Rod Holder Kit

    5.00 out of 5
    $13.99
    Add to cart
  • YakGear UniLeash – Paddle & Fishing Rod Leash

    YakGear UniLeash – Paddle & Fishing Rod Leash

    5.00 out of 5
    $9.99$27.99
    Select options
« SHOP | MENU »
preloader